O4Q112-800G-ACC is a passive copper cable with integrated equalizer circuit. It can extend the length up to 4 meters and 5 meters while maintaining low latency and low power consumption of 1.5W and 0.6W respectively."}},{"@type":"Question","name":"What are the main application scenarios for the O4Q112-800G-ACC cable?","acceptedAnswer":{"@type":"Answer","text":"It is mainly used for switches with OSFP ports, with the branch end connected to a 200G QSFP112 port of either ConnextX-7 network card or BlueFIeld-3 DPU."}},{"@type":"Question","name":"Can the O4Q112-800G-ACC cable be used for 200G network cards with OSFP ports?","acceptedAnswer":{"@type":"Answer","text":"No, it cannot be used. QSFP112 and OSFP are two different form factors with inconsistent sizes, and they cannot be used together."}}]}
Item Spotlights
NVIDIA/Mellanox MCA7J75-N004 Compatible Active Copper Splitter Cable, Twin Port 800Gb/s to 4x200Gb/s, OSFP Finned Top to 4xOSFP Flat Top, 4 meters
NADDOD O4Q112-800G-AC4 is an 800Gb/s Twin-port OSFP (Octal Small Form-factor Pluggable) Finned Top to 4x200Gb/s QSFP112 (Quad Small Form-factor Pluggable 112G) Flat Top Active Copper Cable (ACC) quad breakout (aka splitter) cable for Ethernet networking. The switch end OSFP has a finned top for additional cooling and the QSFP112 adapter end is flat topped and uses riding heat sinks on the OSFP cage. The ACC contains eight high-speed electrical copper pairs, each operating at data rates of up to 100Gb/s using 100G-PAM4 modulation. The “active” term refers to the passive copper cable with an equalizer integrated circuit to extend the length to 4 and 5-meters.
800G Breakout DAC integrates different heat sink designs of the two-end transceivers, unleashing powerful performance.
The 800G OSFP end transceiver adopts a finned top to provide the necessary thermal management when handling massive data, which is applied for Spectrum-4 Ethernet switches.
Each module on the two or four 400G OSFP breakout side has a flat-top design used in CX7 NICs and relies on heatsinks on the NIC ports to assist the module in cooling.
5.0
5.0