Bit Error Rate (BER) 1E-15 with InfiniBand systems
Up to 100m length
Operating case temp Commercial: 0°C to +70 °C
Hot pluggable
RoHS compliant
SFF-8636 compliant I2C management interface
Description
Q56-200G-AOCH is a QSFP56 VCSEL-based (Vertical Cavity Surface-Emitting Laser) active optical cable (AOC) designed for use in 200Gb/s InfiniBand HDR systems. The 200G AOC offers high port density and configurability, and a much longer reach than passive copper cables in the data centers. Since the AOC is hot pluggable, it is easy to install and replace.
Q56-200G-AOCH has a standard SFF-8665 compliant QSFP56 port on the electrical side towards the host system. It contains four multi-mode fibers (MMF) optic transceivers per end; each operating at data rates of up to 50Gb/s. Q56-200G-AOCH offers selectable retiming per lane for both its optical transmitters and receivers up to 50Gbp/s rates.
Rigorous production testing ensures the best out-of-the-box installation experience, performance and durability. NADDOD’s unique quality active fiber cable solutions provide power-efficient connectivity for data center interconnects. They enable higher port bandwidth, density and configurability at a low cost, and reduced power requirement in the data centers.
Absolute Maximum Ratings
Table1-Absolute Maximum Ratings
Parameter
Symbols
Min.
Typical
Max.
Unit
Notes
Supply Voltage
Vcc3
-0.5
-
+3.6
V
Power Supply Voltage
TS
-40
-
+85
°C
Operating Humidity
RH
+5
-
+85
%
1
Data input voltage
Vcc
-0.3
4.0
V
Note:
[1] No condensation
Recommended Operating Conditions
Table2-Recommended Operating Conditions
Parameter
Min.
Typical
Max.
Unit
Note
Operating Case Temperature
0
-
+70
°C
Power Supply Voltage
3.14
3.3
3.47
V
Power Dissipation
4.35
-
4.55
W
1
Supply noise tolerance (10Hz-10MHz)
66
-
-
mVpp
Operating relative humidity
5
-
85
%
Note:
[1] Per terminal
Mechanical
Unit mm
L
L1
L2
L3
L4
W
W1
W2
H
H1
H2
H3
H4
H5
Max
72.2
-
128
4.35
61.4
18.45
-
6.2
8.6
12.4
5.35
2.5
1.6
2.0
Type
72.0
-
-
4.20
61.2
18.35
-
-
8.5
12.2
5.2
2.3
1.5
1.8
Min
68.8
16.5
124
4.05
61.0
18.25
2.2
5.8
8.4
12.0
5.05
2.1
1.3
1.6
Regulatory Compliance
Table3-Regulatory Compliance
Parameter
Value
Units
Diameter
3±0.2
mm
Minimum bend radius
30
mm
Length tolerance
1 m ≤ length ＜ 5 m: +300 / -0
m
5 m ≤ length ＜ 50 m: +500 / -0
m
Length ≥ 50 m +1000/ -0
m
Cable color
Aqua
Part Numbers and Descriptions
Table4-Part Numbers and Descriptions
Part Number
Description
Q56-200G-A3H
Active fiber cable, IB HDR, up to 200Gb/s, QSFP56, LSZH, black pulltab, 3m
Q56-200G-A5H
Active fiber cable, IB HDR, up to 200Gb/s, QSFP56, LSZH, black pulltab, 5m
Q56-200G-A10H
Active fiber cable, IB HDR, up to 200Gb/s, QSFP56, LSZH, black pulltab, 10m
Q56-200G-A15H
Active fiber cable, IB HDR, up to 200Gb/s, QSFP56, LSZH, black pulltab, 15m
Q56-200G-A20H
Active fiber cable, IB HDR, up to 200Gb/s, QSFP56, LSZH, black pulltab, 20m
Q56-200G-A30H
Active fiber cable, IB HDR, up to 200Gb/s, QSFP56, LSZH, black pulltab, 30m
Q56-200G-A50H
Active fiber cable, IB HDR, up to 200Gb/s, QSFP56, LSZH, black pulltab, 50m
Q56-200G-A100H
Active fiber cable, IB HDR, up to 200Gb/s, QSFP56, LSZH, black pulltab, 100m
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static-free environment is highly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
800GBASE-2xSR4 OSFP PAM4 850nm 50m MMF Module