N6300-48Y8C, 48-Port Ethernet L3 Data Center Switch, 48x 10/25Gb SFP28, with 8x 40/100Gb QSFP28, Support MLAG, Broadcom Chip, Support RoCE

#18877
Model: N6300-48Y8C
Sold: 44
In Stock: 2
$ 6209.00

Item Spotlights

  • Non-blocking CLOS-architecture data center network for high-performance
  • Support Open API interfaces: Neutron, OVSDB, Python, automatical tools
  • High performance x 86, Broadcom chip, 16GB DDR4 ECC SODIMM, 240G MLC M.2 SSD
  • 4TB switching capacity, 2980Mpps forwarding efficiency
  • Support for VXLAN-EVPN, unlimited Tunnel Routing&Bridging, up to 32K Tunnel
  • Support RoCE, Smartlink, MLAG, VARP, NAT, RIP/OSPF/BGP, PBR, VRF, BFD
  • 1+1 power redundancy, 3+1 fans redundancy, dual BIOS, dual BMC design
N6300-48Y8C, 48x 10/25Gb SFP28, Managed Data Center Switch
N6300-48Y8C, 48-Port Ethernet L3 Data Center Switch, 48x 10/25Gb SFP28, with 8x 40/100Gb QSFP28, Support MLAG, Broadcom Chip, Support RoCE
Specifications
Product Highlights
Questions & Answers
Resources
Specifications
Product Highlights
Questions & Answers
Resources
Description

N6300-48Y8C, 48-Port Ethernet L3 Data Center Switch, 48x 25Gb SFP28 with 8x 100Gb QSFP28, Broadcom Chip, MLAG Support, Open API Interface Support, RoCE Support

N6300-48Y8C provides 48x 10G/25G ports and 8x 40/100G QSFP28 ports, supports wire-speed L2/L3 forwarding, and is set at the Leaf layer of traditional cloud center and SDN cloud center scenarios, applicable to rich scenarios such as AI, HPC, Multi-site cloud Center and other application scenarios. It can sufficiently meet users' network requirements of high performance, high availability, intelligence and visualization. N6300-48Y8C supports RoCE, PFC, DCBX and ECN, providing low-latency, zero packet loss, non-blocking lossless Ethernet with industry-leading Broadcom silicon, supporting extensive Layer 3 IPv4/IPv6 routing protocols as well as multicast protocols and standards-based VxLAN EVPN switching capabilities to meet the growing needs of data center environments, enabling scalable and flexible data center leaf spine solutions. The combination of network virtualization and RoCE enables a total solution for large high-performance data centers.

Specifications
Ports
48x 25G SFP28| 8x 100G QSFP28
Switch Chip
BCM56870
CPU
Intel Broadwell-DE(1527)
Number of VLANs
4K
Switching Capacity
4 Tbps
MAC Address
32K min/288K max
Forwarding Rate
2980 Mpps
Jumbo Frame
9600
RoCE
Supported
SDRAM/DRAM/RAM
16GB
ARP Capacity
16K
Flash Memory
240GB
IPv4/IPv6 Routes
80K/15K
Packet Buffer
32MB
IP Tunnel
2K
Voltage Overvoltage Protection Class
8KV contact,15KV Air
Latency
≤1μs
Hot-swappable AC Power Supplies
2 (1+1 Redundancy)
System Restart
<120s
Hot-swappable Fans
4 (3+1 Redundancy), Front-to-Back
Typical/Max.Power Consumption
120W/380W
Weight
13KG
MTBF
>100K Hours
Dimensions (HxWxD)
1.73"x 17.40"x 15.23"(44x 442x 387mm)
Warranty
3 Years(30-Day Return)
Product Highlights
48x 25G SFP28 with 8x 100G QSFP28, supporting Open API interface

Support wire-speed L2/L3 forwarding, located in the Leaf layer of traditional cloud center and SDN cloud center scenarios, meeting the network deployment requirements of AI, HPC, HDFS, DT and other application scenarios.

CLOS architecture

Non-blocking CLOS architecture data center network for high performance, high availability and resilient network requirements.

1+1 power supply redundancy and 3+1 smart fans with automatic speed adjustment

support for over-current, over-voltage and over-heat protection, and non-intermittent power supply for terminal equipment greatly improve the stability of the network. Independent BMC module design, can monitor the device's CPU, memory and other information, device restart can still monitor the device status.

Stacking or MLAG for different demands

M-LAG (cross-device link aggregation) allows link aggregation between multiple devices. Stacking can combine several devices into a whole device for use. Both the two functions can meet the demands for different scenarios.

Compare Items
N6300-48Y8C

N6300-48Y8C

N6100-48X8C

N6100-48X8C

N6300-32C

N6300-32C

N6400H

N6400H

Description
N6300-48Y8C, 48-Port Ethernet L3 Data Center Switch, 48x 10/25Gb SFP28, with 8x 40/100Gb QSFP28, Support MLAG, Broadcom Chip
N6100-48X8C, 48-Port Ethernet L3 Switch, 48x 10Gb SFP+ , with 8x 40Gb/100Gb QSFP28, Support MLAG, Support VXLAN, Support RoCE
N6300-32C, 32-Port Ethernet L3 Data Center Switch, 32x 40Gb/100Gb QSFP28, Support MLAG, Broadcom Chip
N6400H, 4-Slot 4U Ethernet L3 Data Center Switch Unloaded, 128x 40/100Gb QSFP28 | 112x 10Gb SFP+ ,with 32x 40/100Gb QSFP28, Support MLAG, Broadcom Chip, Support RoCE
SFP Ports
48x 10/25G SFP28 | 8x 40/100G QSFP28
48x 1G/10G SFP+ | 8x 40G/100G QSFP28
32x 40G/100G QSFP28
128x 40G/100G QSFP28
VXLAN
NVGRE - -
GENEVE - -
EVPN
PFC
ECN
MLAG
VARP - - - -
VRRP - - - -
Smartlink
NAT - - - -
OSPFv2/v3
BGP4/BGP4+
SFlow
Open API: Neutron, OVSDB, Python
Questions & Answers
Ask a Question
Q:
What is the maximum port count available on the N6300-48Y8C switch?
A:
The 25Gbe switch switch provides 48x 10/25Gb SFP28 ports and 8x 40/100Gb QSFP28 ports for a total of 56 ports.
Q:
Does the N6300-48Y8C switch support MLAG?
A:
Yes, the 25 Gigabit switch supports MLAG (Multi-Chassis Link Aggregation) for increased network redundancy.
Q:
Yes, the 25 Gigabit switch supports MLAG (Multi-Chassis Link Aggregation) for increased network redundancy.
A:
The N6300-48Y8C switch supports a wide range of Layer 2 features including VLANs, Spanning Tree Protocol (STP), Link Aggregation Control Protocol (LACP), and Quality of Service (QoS).
View More
Quality Certification
ISO140012015
ISO 90012015
ISO450012018
FDA
FCC
CE
RoHS
TUV-Mark
UL
WEEE
What We Supply